断裂的例句大全

Application of Image Analyzing Technique on Examination of Broken Concrete Profile

图像分析技术在混凝土断裂面研究中的应用

Brittle Failure Study about Anchor-chain Steel Used in Ship

船用锚链钢脆性断裂的研究

The location analysis results of the pencil lead breaking test on thermal barrier coating showed the accuracy of this method.

对热障涂层进行铅笔芯断裂的定位分析验证了该方法的准确性。

The results showed that tensile strength, tensile yield stress and tensile breaking stress were increased with the increase of bore distance;

结果表明，随筛板孔距的增加，其拉伸强度、拉伸屈服应力及拉伸断裂应力均提高；

Depth of Solder Penetration drastically affects the breaking load of the joint.

是影响连接部分断裂负载能力的最主要因素。

The minimum breaking load of steel wire strands is investigated by experiments in this paper.

通过大量的试验数据，对我国现在生产的钢绞线的最小断裂载荷进行讨论。

Since the safety devices in the chassis parts are of a first-class quality, they should not corrode or break over the entire lifetime of the vehicle.

底盘部件的安全装置要求质量一流，它们在车辆的整个使用寿命周期内不应发生腐蚀或断裂。

The large bowlder surface of dinner table must be uplifted vertically in avoidance of breakage. The small one shall also be held vertically instead of horizontally.

大面积的餐台玉石面，必须竖抬，避免餐台断裂。小面积的玉石面也应竖拿，切忌平面横抬横拿。

Effect of Mg Segregation on Grain Boundary Binding Force and Fracture Stress in High-Strength Aluminium Alloy

高强铝合金Mg偏析对晶界结合力和断裂应力的影响

Still another kind is a boing bowing fracture. This happens with a bone that bands bends but does not break. It happens mostly in children.

还有一种弓状骨折，发生在骨头已经弯曲但还没有断裂的情况，这种骨折多出现在孩子身上。

Blunting line equation in ductile fracture toughness j_(ⅰ c) measurement

延性断裂韧度J（ⅠC）测试中的钝化线方程

The microstructural anomalies resulting from cadmium embrittlement can lead to component fractures in service.

隔脆化造成的微结构异常会导致部件在使用中断裂.

Analysis of Reasons for Shaft Breaking in PXQ1200/ 150A Light Hydraulic Gyratory Crusher

PXQ1200/150A液压旋回破碎机主轴断裂原因分析

Cured resin has excellent properties in tensile strength and fracture resistance.

浇注体具有较高的拉伸强度，优异的抗断裂韧性。

Influence of Crystalline Structure on Fracture Strength of Diamond Films

晶体结构对金刚石膜断裂强度的影响

The concept, formation conditions and formation mechanism of metal matrix intragranular composites were presented. The intragranular composite between α-Al and TiC leads to crystalline fracture.

提出了金属内晶型复合材料的概念、形成条件及其形成机理，分析了其发生穿晶断裂的主要原因是由于TiC与α&Al之间发生内晶型复合。

The Author analyzes the reason for the main shaft breaking witch is the most important part in PXQ1200/ 150A light hydraulic gyratory crusher by actual observation and theoretical analysis.

从实际观察与理论分析两个方面入手，对PXQ1200/150A轻型液压旋回破碎机最重要的部件&主轴的断裂进行分析。

Fracture analysis of crank pin

曲柄销轴断裂分析

The Reason of Coupling Bolt Break for 10MW Bulb Turbine

10MW灯泡式水轮机联轴螺栓断裂原因分析

The follow-up periods was 1 to 8 years ( average 4.5 years), 6% of complication correlated with operation occured, such as plate broken, refracture and coxa plana one case each.

随访时间1～8年（平均4.5年），与手术有关的并发症有钢板断裂、再骨折、晚期扁平髋各1例，占6%。