焊的例句大全

Cut through the brazed seam on the connection to the side section with the parting grinder.

用分离打磨机切断连接到侧面部件的铜焊缝。

The results suggest the joint is not ideal if the Cu layer is too thin or too thick, and it is very important for existing some eutectic substance in brazed seam.

研究表明，Cu层的厚度太薄或者太厚，其连接效果都很不理想，同时在Al合金与Cu中间层接触反应钎焊中，钎缝区存在适当的液相对于提高接头强度是至关重要的。

The simulation mentioned above was confirmed by series experiments, and the proper thickness of the brazed seam is 50~ 80 μ m for the CRB joint of Al with Si as an interlayer.

在试验证明FEM计算结果的可靠性的基础上，给出了Si为中间层进行LF21铝合金接触反应钎焊时，其合适的钎缝宽度范围是50～80μm。

Cracking analysis of brazed phosphorus deoxidized copper tube

磷脱氧铜管焊接漏气失效分析

Combination Process of Al_2O_3 Ceramic/ Steel Using Braze Welding Method in Air

复相A12O3基陶瓷/钢在大气中直接钎焊的连接工艺

Research of hydrogen shield diffusion braze welding technology for precise parts

精密零件氢气保护扩散钎接焊工艺研究

Simple Analysis on Vacuum Braze Welding In Making Aluminium Heat Exchanger

铝制换热器真空钎焊浅析

Adaptability of brazing filling metal used for monolayer diamond tools with vacuum furnace brazing

金刚石工具真空钎焊钎料的适应性

A Study on Brazing of Graphite to Brass and Analyse of Interfacial Microstructure

石墨黄铜异质钎焊研究及界面结构分析

Electric brazing machine and apparatus ( excl. furnaces, ovens and heating equipment)

平板式远红外线加热炉电硬焊机器和设备（熔炉，烘炉和加热设备除外）

Magnesium Alloy Melting Furnace Structure Design and Research Based on Flow Heat Transfer Analysis electric brazing machine and apparatus ( excl. furnaces, ovens and heating equipment)

基于流动传热分析的镁合金熔化炉结构设计与研究电硬焊机器和设备（熔炉，烘炉和加热设备除外）

Electric brazing machine and apparatus ( excl. furnaces, ovens and heating equipment) concentrating machinery or plant, fitted with thermal equipment, non-domestic

电硬焊机器和设备（熔炉，烘炉和加热设备除外）非家用选精机或装置，装有加热设备

A novel technology of adaptive focusing that serves to the ultrasonic C scan imaging testing of electric contact brazing interface with arc surface by controlling the three dimensional precision working table, has been developed by presenting the algorithms of adaptive following the tracks of transducer focusing.

采用自适应跟踪探头聚焦轨迹算法研究了自适应聚焦技术，通过控制三维精密工作台实现了弧型电触头钎焊界面的C扫描超声检测。

Furnace Brazing Technique of 6063 Alloy and its Wave-guide Components

6063铝合金及其波导制件气保护钎焊工艺研究

Furnace Brazing Technique of Aluminium-alloy Case for Airborne Electronics in Nitrogen Atmosphere

机载电子设备铝合金箱体氮气保护钎焊工艺

The influence of brazing temperature and time on the wettability is significant.

钎焊温度和时间对润湿性有重要影响。

Brazing temperature and lasting hours have certain influences to wearing and tearing ratio.

钎焊温度和时间对磨耗比有一定的影响。

As the brazing temperature increased, shear strength of the joints increased and then decreased.

在本研究的范围内，随着钎焊温度的升高，接头剪切强度表现为先升高后降低的趋势。

However, the brazing temperature had little influence on the liquefying time.

而钎焊温度对中间层的液化时间没有明显的影响。

Improvement of High-frequency Induction Brazing Process for Brass and Stainless Steel Tube

黄铜与不锈钢管高频感应钎焊工艺的改进