聚合的例句大全

Propagation Rate Constants for the Cationic Polymerization of Vinyl Monomer

乙烯基单体正离子聚合中链增长速率常数的研究进展

The layers of montmorillonite contain Lewis acid sites and transition metal ions, which could be used for catalytic polymerization of vinyl monomer.

蒙脱土片层含有Lewis酸点及过渡金属离子可用于烯类单体的催化聚合反应；

Graft copolymerization of betaine type vinyl monomer onto hydroxyethylcellulose

甜菜碱型烯类单体与羟乙基纤维素的接枝聚合

Studies on the atom transfer radical copolymerization of vinyl monomer and vinyl monomer containing nitroxide group

乙烯基单体与含氮氧稳定自由基单体的原子转移自由基共聚合研究

A study on graft polymerization of vinyl monomer onto carbon black

乙烯基单体在炭黑表面上的接枝聚合

Kinetics of Vinyl Monomer/ NSubstituted Maleimide Copolymerization

乙烯基单体/N-取代马来酰亚胺共聚合动力学

When the monomer concentration increased, the grafting rate, initial polymerization rate and final conversion rate increased, but the grafting efficiency decreased;

单体浓度上升，接枝率、初始聚合速率和最终转化率也上升，但接枝效率则下降；

With the increase of monomer concentration, polymer particle size increases.

随着单体浓度的增大，聚合物粒子的粒径随之增大。

The other preparation conditions, such as monomer concentration, temperature, and time of polymerization, were systematically studied.

本文还对其它制备条件，比如单体浓度，温度，聚合反应时间都进行了系统研究。

The inverse microemulsion polymerizations at the high monomer concentration

高单体浓度下反相微乳液聚合

The effects of monomer concentration, reaction temperature, initiator dosage on polymerization rate and intrinsic viscosity of product were investigated.

探讨了单体浓度、反应温度、引发剂用量等因素对聚合反应速率和产物特性黏数的影响。

The relationships of molecular weight and monomer concentration, initiator concentration show that the polymerization reaction system has the characteristic of living polymerization.

分子量与单体浓度、引发剂浓度的关系说明，该体系具有一定程度的活性聚合特点。

The graft polymerization processes could be controlled by monomer concentration, UV-irradiation time and photoinitiator concentration.

接枝聚合过程可以通过改变单体浓度、紫外辐照时间以及光引发剂浓度来进行调控。

The effects of polymerization conditions, such as initiator concentration, monomer concentration, reaction time and temperature, on grafting parameters were studied.

研究了各种聚合条件如：引发剂浓度、单体浓度、反应时间、温度等对接枝参数的影响。

The effects of radiation environment, radiation dose, monomer concentration and reaction temperature in terms of grafting parameters were investigated systematically.

系统研究了辐射气氛、辐射总剂量、单体浓度以及聚合反应温度对体系接枝参数的影响。

An acid-proof high water-absorbing resin was prepared from acrylamide as monomer, K_2S_2O_8 as initiator, and N, N'-methylene-bis-acrylamide as crosslinking agent by aqueous solution polymerization and then by sulfonation reaction.

以丙烯酰胺（AM）为单位，K2S2O8为引发剂，N，N′-亚甲基双丙烯酰胺为交联剂，进行水溶液聚合，再对产物进行磺化反应，制得耐酸性高吸水性树脂。

The surface modified SiC fine powder was prepared by organic coating through silane coupling agent hydrophobic processing and acrylamide monomer graft polymerization on its surface.

通过硅烷偶联剂疏水预处理和丙烯酰胺在其表面接枝聚合改性，获得了有机包覆的改性SiC微粉。

Dispersion Copolymerization of Acrylamide/ Cationic Monomer in Salt Aqueous Solution

AM/阳离子单体在盐水介质中的分散聚合

Using acrylamide as monomer and by homopolymerization posthydrolysis procedure, the polyacrylamide with relative super-high moleculer weight is synthesized for oil driving in oil field.

考察了水解剂、水解温度、水解时间、水解剂用量等因素在后水解过程中对聚合物相对分子质量的影响。

Acrylamide, crylic acid and N, N ′-methylene bisacrylamide were chosen for preparing magnetic composite polymer microsphere with carboxyl groups in inverse emulsion. Acrylamide is monomer, crylic acid provide functional groups, and N, N ′& methylene bisacrylamide is the cross-linking agent.

在制备含羧基的磁性高分子微球时，分别选用丙烯酰胺、N，N′-亚甲基双（丙烯酰胺）和丙烯酸作为聚合单体、交联剂和功能基单体。