误差的例句大全

Next, the iterative error estimation for MRM is discussed.

讨论了MRM方法中的迭代误差估计。

This paper discusses the camouflage design of MBB sensor mount and its effect, for the camouflage of MBB has an effect on the background error of RF shielding anechoic chamber and on the position accuracy of target in simulation testing.

本文介绍MBB大型飞行转台的伪装设计与效果分析，因为MBB转台伪装的效果与射频屏蔽暗室的背景误差有关，它直接影响仿真试验中目标定位精度。

When the true model error is need to be estimated, NPF is the only choice.

当需要估计真实模型误差时，只能用NPF。

Based on system identification with recursive least squares method, the NLJ optimizing algorithm is used to tune the PID control parameters.

在运用递推最小二乘法在线辨识系统模型参数的基础上，采用NLJ方法（随机数直接搜索法）以ITAE（时间乘误差绝对积分）指标最优为目标对PID控制参数寻优整定。

An Error Correction Form of the D an amic Model

动态模型的一种误差修正形式

The errors caused by the phase uncertainties of embedded parameters are deleted. In addition, LRL method can be used to de-embed the S parameters from the microwave transistor test fixture.

由于利用代数消去法，去除了嵌入参量相位不确定性引入的误差，LRL法可用于微波晶体管测试夹具的去嵌入。

The Study of the Influence of Manufacturing Error and Trench Structure to Static Rigidity for LMG Design and fabrication of a novel resonator for resonant accelerometer

LMG制造误差和沟槽结构对静刚度影响的研究谐振式微加速度计驱动和检测结构设计及制作

Objective: The paper puts forward the proposals for ensuring quality of the Leksell Gamma Knife ( LGK) stereotactic radiosurgery ( SRS) by measuring and analyzing the errors of LGK in singular process.

目的：本文通过测量和分析伽玛刀立体定向放射外科过程中靶点位置误差，提出保证伽玛刀治疗质量的建议。

The LBL system includes position theorem and analysis of error.

在长基线系统中，介绍了定位原理和对系统误差作了分析。

Calculation shows that the viscosity model based on PR state equation has big error, while LBC empirical relationship can provide more accurate viscosity of acidic gas.

通过计算比较发现，基于PR状态方程的粘度预测模型误差较大，而LBC经验关系能较准确地确定酸性气体的粘度。

Voltage present on one channel can easily be coupled to an adjacent channel and may cause significant errors.

某个通道上出现的电压很容易耦合到相邻通道，并且会引起明显的误差。

The results show that the there are certain errors between the simulated track of storm center and the observed one, but both the total tend is moving northeastward and the simulated results can be referenced.

结果表明，风暴中心的模拟路径与实况路径虽有一定误差，但总趋势均向东北方向移动，表明模式对本个例的模拟预报可以参考；

JFP algorithm converts the distribution of MADIDs into the local factorial form for improving computational efficiency; For decreasing error, the inference is performed by propagating factor particle on junction tree.

JFP算法将MADIDs的概率分布转变成局部因式形式以提高计算效率，并利用联合树来传播因式粒子以减少推理误差。

Methods: The computer programme counting liquid coefficient of viscosity in realizing unlimited extensive situation was designed.

目的 以前所用作图外延拟合直线求液体粘滞系数方法误差较大,实验效率较低.

Under normal market conditions, the average tracking error of less than percent.

在正常市场情况下, 日平均跟踪误差小于0.35%.

With high precision of process printing and easy operation.

印刷清晰度高,套色误差小,调整方便.

Example for error estimation of phasor induction log is given.

根据置信区间的指标,文章给出了相量感应测井误差估计的实例.

Q: Would different sample size for different questions affect the sampling error?

问: 个别题目的样本数目会否影响抽样误差?

The sizing process must be taken in order to eliminate the size tolerance and roundness one after the seamless pipe rolled and heat treated.

为消除无缝钢管的轧制和热处理所产生的尺寸和椭圆度误差等缺陷，一般要采用定径工艺。

With the change of scanning speed, the size tolerance of the PP part exhibited a minimum.

随着扫描速度的变化，试件翘曲量存在极小值。试件的尺寸误差随着激光功率增大、扫描速度降低或铺粉厚度减小而降低。