进行的例句大全

This paper discussed the horizontal forging process of a high strength long bolt through computer simulation, including the forming technology and technology parameters.

本文通过计算机模拟分析了高强度长螺栓平锻过程的变形特点，对其成形工艺和成形特点进行了分析。

Checking the resisting overturn ability of bolt which boring through the mass wall;

对固定龙骨的穿墙螺栓进行抗倾覆验算；

Several cases of roof bolting application in various mining and geological conditions were described.

在不同的采矿地质条件下，进行了多种顶板锚固应用研究。

Healthy rabbits were injected contrast agent at ear by intravenous bolus injection of the albumin targeted and non targeted ultrasound contrast agent in a dose of 0.04 ml/ kg, respectively.

经耳缘静脉团注0.04ml/kg的白蛋白超声造影剂进行超声造影，分为靶向组（20只）和非靶向组（10只）；

Twenty minutes after a single bolus dose, it may be unnecessary to antagonize the block when the train-of-four has returned to normal and fade is not present to a tetanic stimulus.

单次用药20分钟后，当四个成串刺激恢复正常和强直刺激消退后，没有必要再进行拮抗。

It would be great if the world permits Israel to conduct precision bombing!

要是国际默许以色列进行无差比轰炸就好了！

The plane swooped in on its bombing run.

飞机俯冲下来进行轰炸。

The results of in-situ measurement of the deflection of bonded prestressed concrete roof beams with a span of 21 meters in frame structure of a gymnasium after construction are presented.

某健身房跨度为21m的有粘结预应力屋面框架梁，在竣工后对其进行了挠度的实测。

The basic principle of Wafer bonder is to require bonding material applied a series of external conditions, such as pressure, temperature, environment, voltage.

晶圆键合机的基本原理是对需要键合的材料施加一系列的外部条件，比如压力、温度、环境、电压，不同的外部条件可以用来进行不同材料和结构的键合。

The influence of junction area and bonding pad size on the dark current has been also analyzed.

文中还对器件结面积和电极尺寸等对暗电流的影响进行了比较和分析。

This paper introduces how to recognize and locate the bonding pad from a silicon chip image with the method of Digital Image Processing and Pattern Recognition.

介绍了采用图像处理和模式识别的方法对一幅半导体芯片的图像进行焊盘的识别和定位。

The explosive bonding parameters were calculated and optimized before experiment.

试验前，首先对爆炸复合参数进行了计算和优化设计。

In order to meet the industrialized requirement, the explosive bonding for large and thick stainless steel with billet was experimentally investigated.

为了满足爆炸复合-轧制一体化技术的产业化要求，该文成功地进行了不锈钢/普碳钢大型厚板坯（复板厚20mm）的爆炸复合试验。

In order to enhance the welding speed of microcircuit chips, the control software algorithm for the bonding machine was optimized.

为了提高生产微电路芯片的焊接速度，我们对超声波焊接机工业控制软件的算法进行部分优化。

Analyse the application of visual system in COG bonding machine.

针对视觉系统在全自动COG热压焊机中的应用进行分析。

At last the weight of bone ash and calcium content were measured.

最后进行灰重及骨钙含量的测定。

Methods Twenty sides of 10 adult cadaver heads fixed in formalin were used, the anatomy of the bony labyrinth and the relationship of the correlative structures were observed and measured, and meanwhile the actual surgical procedure was mimicked under the surgical microscope.

方法模拟幕上下联合经岩骨入路的手术操作，在手术显微镜下对10具（20侧）福尔马林固定的成人带颈头颅标本进行解剖，并观测骨迷路及其与重要结构间的解剖关系。

An High pressure Gas Booster is an air pump that is driven by part of the incoming compressed air supply enabling it to cycle and pump the unbalance of the supply to a higher output pressure.

气体增压泵浦是一种打气筒，它是利用被压缩的空气来驱动在尚未达到平衡时的供给压进行循环性的打气，以提高输出侧的气体压力。

Al-Cu eutectic brazing metal based on the pure aluminium substrate is welded in vacuo.

制备了Al-Cu共晶合金钎料，以纯铝棒料为基体采用对接接头进行了真空钎焊。

On the basis of classification of shop names according to their scope of business, general features of shop names in Yangzhou are drawn, namely, the era of coexistence and succession, and the pattern of variability of co-existence, accuracy and ambiguity coexist.

根据扬州店名的经营范围对其进行分类分析，并从中概括出扬州店名的特点，即时代性与继承性共存、多变性与模式性共存、准确性和模糊性共存。