进行的例句大全

The theory of system braking is mainly analyzed, braking and orientation problem is solved by the combined energy consumption breaking and plug braking.

对系统制动问题进行了重点讨论，提出能耗制动和反接制动相结合的方法。

Aiming at the result of simulation, braking time and braking efficiency was analyzed.

根据刹车系统仿真结果，对刹停时间、刹车效率等性能进行了分析。

The fermentation of lactic acid by rye bran flour was studied here.

最后，论文对黑麦麸皮生粉乳酸发酵进行了研究。

The starch branching enzyme bound to starch granule in rice endosperm was investigated in the present paper.

对水稻胚乳淀粉颗粒结合的淀粉分支酶进行了研究。

The simulation mentioned above was confirmed by series experiments, and the proper thickness of the brazed seam is 50~ 80 μ m for the CRB joint of Al with Si as an interlayer.

在试验证明FEM计算结果的可靠性的基础上，给出了Si为中间层进行LF21铝合金接触反应钎焊时，其合适的钎缝宽度范围是50～80μm。

Furnace brazing technique of wave-guide made from 6063 alloy is studied.

采用气保护炉钎焊方法对6063铝合金及其波导进行了钎焊工艺研究。

Finally, the couple analysis of interfacial compound and micro flow, velocity field is conducted, the interfacial compound growth behavior under arc brazing are then enriched.

最后对液滴内部的显微流场、速度场和界面组织进行了耦合分析，表明电弧钎焊过程中的强大流场对界面须状金属间化合物的破碎和迁移有利，充实了电弧钎焊界面化合物生长过程研究。

A study on a module to solve the problem of the inefficiency of vacuum brazing with silver based solder.

针对多年来银基钎料真空钎焊效果不佳的问题，以一组件为例进行研究。

Al-Cu eutectic brazing metal based on the pure aluminium substrate is welded in vacuo.

制备了Al-Cu共晶合金钎料，以纯铝棒料为基体采用对接接头进行了真空钎焊。

For both aluminum alloy and magnesium alloy, a sound joint can be obtained under appropriate welding conditions using the process method of ultrasonic brazing.

采用一定的钎料对铝合金、镁合金进行超声波钎焊能较好提高其接头力学性能。

On the basis of classification of shop names according to their scope of business, general features of shop names in Yangzhou are drawn, namely, the era of coexistence and succession, and the pattern of variability of co-existence, accuracy and ambiguity coexist.

根据扬州店名的经营范围对其进行分类分析，并从中概括出扬州店名的特点，即时代性与继承性共存、多变性与模式性共存、准确性和模糊性共存。

This paper designs application of the algorithm in optimizing multi-objective flexible job-shop scheduling. ( 3) A simulation experiment is carried out to illustrate that the proposed hybrid genetic algorithm could solve the general multi-objective flexible job shop scheduling problem problem effectively.

对该算法在多目标柔性作业车间调度优化的应用进行了详细设计。（3）仿真结果表明，提出的混合遗传算法可以有效解决一般模式下的多目标柔性作业车间调度问题。

Finally, through the above content, combining theoretical knowledge, to improve city brand clothing shop experience and extensive marketing network core coexisting marketing strategy research.

最后，通过上述内容，结合理论知识，对品牌服装完善城市核心体验店与泛网络营销共存的营销模式策略进行了研究。

In this study 6 cross and 9 back cross combination were made between semi wild soybeans and cultivated soybean.

对6个栽培大豆与半野生大豆杂交组合及9个回交组合进行了分析。

The lysine content and the SSR profile of a back cross population was analyzed, and the reliability was proved.

通过对回交家系赖氨酸分析和SSR分子标记检测结果，对该技术的可靠性进行了验证；

According to the fact of offshore surface casing cementing operations, a dynamic response has been designed for on site operation conditions and the design parameters that should be adopted for permissible safe stress and safe allowance have been obtained.

结合海上表层固井作业的实际情况，进行了现场作业条件下的动力响应设计，得到了在安全许用应力及安全余量条件下应该采用的设计参数。

The seepage in dam foundation in Baishan reservoir has been analyzed in detail from many aspects, including underground water outcropping, icing on the surface of reservoir, geological condition of dam foundation and the geophysical detection results, sediment and so on.

从白山水库坝下游地下水出露现象、水库水面结冰现象、坝基地质情况及物探检测结果、沉积条件等多个方面对水库坝基渗漏情况进行了详细分析。

To monitor and manage the material reserves.

对公司的物料库存进行控制和管理；

This paper analyses the digital model for power-controlled pulp-beating degree.

本文就比能量控制打浆度的数字模型进行了分析研究。

A study has been carried out on dynamic response of annular plate installation for cementing surface casing by structural dynamics analysis and according to the status and characteristics of present offshore cementing operations.

应用结构动力学分析方法，结合目前海上表层固井作业的现状和特点，对表层固井环板装置的动力响应进行了研究。