陶瓷的例句大全

The technology of AlN ceramic substrate volume production is introduced in this paper.

文章主要介绍氮化铝陶瓷基片生产的关键技术.

Solvents and chemicals industries, plastics industry, ceramics and refractory materials.

溶剂及化学工业 、 塑胶业 、 陶瓷及耐火材料等.

KSD 302 is kick, automatic reset and of ceramics.

KSD302系列为突跳式陶瓷为主体, 自动复位形式.

Fiberfrax LDS and LDS-AL moldables consist of Fiberfrax ceramic fibers dispersed in a sticky water-based refractorybinder.

FiberfraxLDS与LDS-AL非凝固胶体是分散在粘性 水基 耐火粘合剂中的Fiberfrax陶瓷纤维材料.

The CIC reduces the TCE of the PWB to match that of the ceramic.

铜—殷钢—铜减小了印制板的热膨胀系数,使它与陶瓷的热膨胀系数相匹配.

Methods MSJ, UHMWPE and alumina ceramic wear debris are produced in vitro, while the wear debris of titanium alloy ( Ti6Al4V) is isolated from synovial membrane like interface tissue ( SMLIT).

方法将镁硅玉、高分子聚乙烯和氧化铝陶瓷在体外加工成直径小于10微米的磨损颗粒，钛合金（Ti6Al4V）磨损颗粒为界膜中提取。

Study and implementation of Fe_3Al/ Al_2O_3 ceramic based composite material design expert system prototype

陶瓷基复合材料（Fe3Al/Al2O3）设计专家系统原型的研究与实现

At present, piezoelectric ceramic actuator is relatively perfect driving element in micro-displacement technology. Its appearance inaugurates new times of precision of nanometer.

压电陶瓷致动器是目前微位移技术中比较理想的驱动元件，它的出现开创了精度进入纳米级的新时代。

A forming process for preparing high density crystalline ceramic matrix composites was suggested.

为制备高致密度晶态陶瓷基体复合材料推荐了一种成型工艺和一种制备过程.

Cerium-tungsten and AIN ceramics pieces with high density were obtained by the hollow cathode plasma sintering.

空心阴极烧结工艺可制备出致密度高,导热性能好的AIN陶瓷和较高致密度的铈钨样品.

The main shopping mall furniture, furniture, hardware, electrical appliances, ceramics, building materials, decorative materials.

该购物广场主营家俱 、 家私 、 五金 、 电器 、 陶瓷 、 建材 、 装饰材料等.

After entering a life, the development of Jingdezhen ceramics obtained tremendous progress.

入世后, 景德镇陶瓷业的发展取得了巨大的进步.

While the screen sinha is the guarantee that the ceramic printing quality and product quality ratio.

而丝网制版正是包管陶瓷印花度度和产物残品率的关头.

Study of SHF Ceramics Lining

SHF陶瓷衬垫的研制

The Mechanism of Selective Electroless Copper Plating Micro-pattern on Ceramics Without Sensitisation and Activation

陶瓷表面无敏化活化微细镀覆机理研究

Cock, fluid-flow control ( excl. of unhardened vulcanized rubber, ceramics or glass)

液体流量调整旋塞（未硬化硫化橡胶、陶瓷或玻璃制的除外）

The simulation results show that the temperature field of the ceramic packaged sensor is similar to that of unpackaged one, which proves the feasibility of this packaging scheme.

模拟结果显示，该封装后的传感器的温度场与未封装传感器相似，证明陶瓷封装结构是可行的；

Study on Neural Networks Dynamic Hysteresis Model for Piezoceramic Based on Wiener Model

基于WIENER模型的压电陶瓷神经网络动态迟滞模型的研究

The sintering calefactive system was made by the TG-DSC curve analysis. Surface morphology analysis was performed with scanning electron microscopy.

利用TG-DSC曲线分析制定烧结升温制度，采用扫描电镜观察多孔陶瓷表面形貌。

In this thesis, from Chinese and overseas part I expatiate history of the development and application of ceramic mural decoration breadthwise.

本论文横向从中国和外国两部分对陶瓷壁饰的发展历史和应用情况进行了阐述；