Tolerances

There are very fine tolerances, and very high quality standards.

这些铸件有着很好的耐力和非常高的质量标准.

Assured moisture distribution within a limited range of specified tolerances.

在特定的公差限定范围内确保湿度分布.

The measurements of the stand automatically include tolerances.

胸架的尺寸自然包括了公差.

When a value is outside the table, individual tolerances shall be indicated.

对于此表中未列出的值, 其尺寸应标注个别公差.

No conflict between feature linear and geometric tolerances.

同一标注线性公差和形位公差不能矛盾.

Not only must the centers decrease, but the tolerances to produce quality bonds must also decrease.

不仅中心间距减少, 而且产生优质连接的容限也必须减少.

Dasting tolerances are in with the basic configuration blank casting size.

铸件公差带对称于坯料铸件基本尺寸配置.

All dimensions and tolerances apply in a free state condition.

所有的尺寸和公差都适用于单品状态下.

Machining, lapping to close tolerances is easy.

比较容易达到机加工和抛光精度.

Casting tolerances are in with the basic configuration blank casting size.

铸件公役带对称于毛坯铸件基本尺寸设置.

Tolerances and workmanship for the trays, and tray-connection to the hoppers.

托盘的工艺和公差以及托盘与料斗的连接.

Then analysis the reasons and influencing factors of such tolerances.

最后分析出现误差的原因以及影响因素.

Establish tolerances at each critical control point.

在每个关键控制点设立公差.

Dimensions and tolerances shall apply after application of coatings.

尺寸和公差同样适用于喷漆后.

Ask yourself: how these and tolerances can and inspected?

标注公差时要自己想象一下能不能加工到这种水平?