For work under conditions of special hazard ( explosion, corrosive chemicals), use a face shield.

High nitrogen steels have the nature of high strength, good tenacity, uniform corrosion resistance and local corrosion resistance ( corrosive pitting, corrosion seam); there is no doube about its excellent nature.

高氮钢具有高强度、良好的韧性、抗均匀腐蚀、抗局部腐蚀（如点蚀，缝隙腐蚀等）性能，优异的性能勿庸置疑。

It is found that, on repeated impact force, the various of failure mode of the components include the surface crackle, surface plastic deformation, corrosive pitting and coat collapse, etc.

发现在反复多次冲击碰撞力作用下，覆层零件表现出表面裂纹、表面塑性变形、表面点蚀和覆层崩落等多种失效形式。

For moderate-hard teeth of gears, this paper describes the machining technology, machine tool and cutter, as well as design requirements for preventing early fatigue corrosive pitting.

介绍中硬齿面齿轮制造工艺，机床和刀具的选择及早期疲劳点蚀的预防对设计要求。

Analysis of Reason on the Wet-type Cylinder Liner Corrosive Pitting of the Diesel Engine and its Preventive Measurements

水轮机转轮空蚀量预估的一种近似算法柴油机湿式汽缸套穴蚀的原因分析及预防措施

The scanning photos show that magnesium alloys for corrosive pitting corrosion types in 3.5% NaCl solution.

由扫描照片的结果可知，镁合金在3.5%NaCl溶液中的腐蚀类型为点蚀。

The analysis of corrosive pitting about the points-line meshing gear

点线啮合齿轮点蚀的失效分析

The gear corrosive pitting recognition based on wavelet packet analysis and frequency-band energy decomposition

基于小波包分析和频带能量分解的齿轮点蚀故障识别

Based on EDS and SEM analysis of metal corrosion surface, the course of contact corrosion between aluminum alloy, structural steel and basaltic microfiber heat-resistant materials were proposed.

通过对铝合金、结构钢等金属接触腐蚀表面的EDS成分分析和SEM微观形貌分析，探讨金属材料与玄武岩微纤维隔热材料接触腐蚀的原因。

The contact corrosion occurred between Ti or Ti-Alloy Parts and other metals in the aircraft structures is described in this paper.

本文叙述了飞机结构中钛及钛合金件与其它金属件之间所发生的接触腐蚀。

The contact corrosion of anodized titanium alloys

阳极化钛合金的接触腐蚀

Contact corrosion of carbon-copper couple in 3% NaCl aqueous solution had been studied.

研究了3%NaCl溶液中碳-铜短路体系的接触腐蚀行为。

The contact corrosion characteristics of hydraulic concrete have been studied in this paper.

本文通过试验研究了水工混凝土的接触溶蚀性能。

Exploration for Contact corrosion of Ti and Ti-Alloy and Protective Test

钛及钛合金接触腐蚀与防护试验探讨

The results of salt spray test and contact corrosion test further approved the same conclusion.

从盐雾试验和接触腐蚀试验结果进一步证实这一结论：注入试样比非注入试样在抗蚀性方面提高很大。

Design and execution of a multi-tiered distributed database for marine corrosion and protection

多层分布式海洋腐蚀与防护数据库的设计与实现

Progress and Trend of Marine Corrosion Monitoring

海洋腐蚀监测的发展现状及趋势

Study of marine corrosion and antifouling behavior of copper alloys

铜合金实海暴露腐蚀与抗污行为的研究

The structure of the rust layer formed in marine corrosion of low alloy steel

低合金钢在海水中局部腐蚀锈层结构的研究

Several familiar forms of marine corrosion were generally introduced with its evaluation techniques.

概述金属材料常见的几种海洋腐蚀形态，并从技术层面介绍不同腐蚀形态的评价方法。

Study of Marine Corrosion of Low Alloy Steel with Electrochemical Impedance Spectroscopy

低合金钢实海腐蚀电化学阻抗谱研究阻抗传感器，阻抗换能器