MEMS的例句大全

With electromagnetic, electrothermal, and electrostatic micro actuators, this bistable structure can be applied to permanent magnet bistable MEMS relay.

此双稳态机构可与电磁驱动、电热驱动和静电驱动等类型的微驱动器联用构成永磁双稳态MEMS微继电器。

This design is composed of the MEMS accelerometer with an adjustable elastic tape and a small base box in which there is circuit board of the system, and the key and the LCD is on the surface of the base box.

本设计主要由一条粘有MEMS加速度传感器的并且可以调整松紧的宽布带和一个小型的底座盒组成，盒中放置了系统的电路板，按键和液晶位于底座盒的表面。

Study of RF-MEMS BAW Filter Using Surface Micromachining

基于硅表面加工工艺的射频体声波滤波器研究

So, how to measure MEMS material or structure mechanical properties has been a key problem.

加之由于其尺度的微小,传统的力学性能测试方法和设备不能直接用于测试,因此, 如何测试MEMS材料(结构)的力学性能成为了关键.

The amplitude-phase curve of MEMS in special driving frequency is got.

通过测量，得到了MEMS器件在特定驱动频率下的幅相特性；

All the experiments are completed with the facilities in the key laboratory of MEMS of Ministry of Education. The methods we present have the advantages of simplicity and low cost.

课题的研究实验皆利用东南大学教育部MEMS重点实验室的工艺条件进行，实验采取的方案具有简单易行，成本较低等优势。

A uniaxial tensile test method for measuring mechanical properties of MEMS thin film materials is presented.

介绍了一种用于MEMS薄膜材料力学特性测试的单轴拉伸试验方法.

Such a testing method for dynamic MEMS characterization measurement is presented, which is based on digital image correlation method ( DICM) and high-speed imaging technique.

基于高速图像采集技术和数字图像相关方法，提出了一种用于MEMS动力学特性测试与研究的时间序列数字图像相关方法。

The combination of pill counts, refill visits and the ACTG adherence questionnaire could be used to monitor adherence in settings where MEMS is not affordable.

药丸数、加药就诊数和ACTG依从性问卷可结合用于在无法承担MEMS的情况下进行依从性监控。

Structure Design and Optimization of MEMS Micro Tactile Probe for NMM

应用于纳米测量机的MEMS微接触式测头的结构设计和优化

Outside removing MEMS section, still face latter very the stereo wiring and technology that gets attention.

除MEMS区域 外, 还面向迩来很受存眷的平面布线科技等.

A Teeterboard Pattern MEMS Permanent Magnet Bistable Structure Supported by Torsion and Cantilever Beam

扭梁悬臂梁支撑的扭摆式MEMS永磁双稳态机构

After feasibility analysis and parameter optimization, a teeterboard pattern MEMS permanent magnet bistable structure supported by a torsion and cantilever beam is fabricated with sacrificial layer technology of non-silicon surface micro fabrication.

在进行理论分析证实可行性和模拟仿真优化参数后，利用非硅表面微加工方法中的牺牲层工艺制备了一种扭梁悬臂梁支撑的扭摆式MEMS永磁双稳态机构。

The study on fabrication process of a high k capacitive MEMS switch is presented.

介绍了一种电容式MEMS开关的制作工艺。

Fabrication of a RF MEMS Switch Using High k Materials as Dielectric Layer

高介电常数介质RF MEMS开关的制作研究

Noninvasive location technology is the key one of MEMS-based medical device for treatment human body.

无创定位技术是MEMS器械用于人体内诊疗过程的重要研究环节之一.

A Study on the Test Technique for RF MEMS CPW Switch

射频微机械共面波导开关测试技术研究

With the development of the Micro Electro Mechanical System ( MEMS ), mico-machining technologies grows rapidly.

微机电系统(MEMS ) 的发展, 带动了 微细 加工技术的发展.

The work mechanics of the electrostatically-actuated MEMS is discussed based on the state space method.

利用状态空间分析法分析了MEMS静电驱动结构的工作机理.

Microsystem or micro electromechanical system ( MEMS ) is briefly introduced.

本文简要介绍微系统的涵义、发展和主要特点.