cooling的例句大全

A newly developed corrosion inhibitor for hollow water cooling copper wire of generator is introduced.

针对发电机空心铜导线的腐蚀问题,研究一种新型铜缓蚀剂.

Usage: It is a corrosion-proof scale preventative agent of superior effect for industrial cooling water system.

用途: 作为工业循环冷却水系统的阻垢缓蚀,其效果非常优异.

After cooling, during the sorting phase, the tiles'dimension and flatness are checked by electronic equipment.

瓷砖冷却后, 在分类阶段, 采用电子设备检测瓷砖的尺寸和平整度.

Finally, the cooling effects of artificial turf and functional filler were investigated in real and lab model environment severally and the influence of infrared powder on the artificial fiber was analyzed.

最后在真实环境和实验室模拟环境中考察了凉爽型人造草坪的降温效果，并分析了反红外粉体对草丝纤维力学性能的影响。

To remove strains and reduce coarse crystalline structures in ( metal ), especially by heating and cooling.

除去特点并减少 ( 金属 ) 里的粗晶结构, 尤指用加热和冷却的方式.

Ascertainment on ground temperature of the floor radiant cooling system

地板辐射供冷系统地面温度的确定

It is composed mainly with the rack and the insulation system, transmission system, infrared drying group, UV-curing group, cooling temperature control group, Aspiratory pressure-targeted group, and electrical control system.

主要由机架及保温系统，传动系统，红外干燥组，UV固化组，冷却控温组，负压吸气定位组、电气控制系统组成。

Baked version must be cooled down, not forced cooling, so as not to make aluminum base.

烤版后必不退给板滞加热, 不给被迫加热, 以免使铝版基变形.

Our country ion azotize uses the cold fireplace, needs the cooling water in the craft control process the way to carry off the cold fireplace the quantity of heat, then the massive energy which is not used is wasted.

我国离子渗氮多采用冷壁炉，在生产过程中需用冷却水的方式带走冷壁炉的热量，这样就导致了大量的能源被浪费掉。

Objects shrink in the cooling trend, the Earth also-ran.

天体趋势在冷却收缩, 地球也然.

The main method of passive cooling-natural ventilation-is the focus we pay attention to.

建筑被动式降温的主要方法 —— 自然通风,更是我们关注的焦点.

Managing natural lighting can cut your artificial lighting ( and cooling ) needs significantly.

管理自然光线可以减少您的人工照明 ( 冷却 ) 需要显着.

It is widely applied in pre-cooling meat, cures food, aquatic product, and flowers and so on.

真空预冷技术除了应用于蔬菜产地预冷,还应用于肉类食品 、 烘焙食品 、 水产品 、 花卉等的真空冷却.

The causes for the defects on annealed copper wires produced on medium wire drawing machines are investigated and the measures for improving equipment and process as well as circulating cooling system for annealing are presented accordingly.

本文分析了中拉机退火铜线产品质量缺陷产生的原因，并提出了相应的工艺、工装改进措施，对中拉机退火冷却循环系统进行改进。

The annealed strip is cooled to the temperature required by galvanizing process in the cooling zone and then goes into zinc pot through sealed channel.

将退火带钢在冷却段冷却到指定温度，经密封通道进入锌锅。

The influence of process condition such as spinning pack, cooling condition, collection oiling, annealed zone, drawing condition etc on products quality were expounded.

探讨纺丝组件、冷却条件及集束上油、缓冷区、拉伸工艺等条件对产品质量的影响。

The results show that, after machining there is no difference about deformation between annealed casting and the one got from slow cooling process in sand mold.

结果表明，铸件在砂型中缓冷和去应力退火再经机加工后两者产生的变形量差异并不明显；

This paper introduces the cooling effectiveness experiment research on a compound air-cooled turbine vane.

介绍了复合式气冷涡轮导叶的冷却效果试验研究.

A water cooling method was also developed to control the heat accumulation during forming.

并采用循环水冷的温控措施解决了成形过程的过热问题.

Exyernal motor oil pump enable good ventilating and cooling conditions, safety operation and prolonged service life.

由于电机、油泵外置,其通风冷却条件好, 运行安全,寿命长.