corner的例句大全

In the process of continuous micro-line blocks machining, the feedrate at the corner formed by two adjacent lines is under various restrictions.

在空间小线段连续加工中，相邻线段拐角处的衔接速度受诸多因素的限制。

The characteristics of the corner rain eaves parts and their forming principle were analyzed. The compound forming was broken into simple bending and flanging.

分析了角部雨檐零件特点及其成形机理，将复合成形分解为简单的弯曲和翻边。

Different models' responses to various steering conditions, including velocity, front-wheel corner and friction coefficient of road surface, are analyzed, which explain that the tire nonlinearity between slip angle and cornering force have effects on the simulation results.

针对不同的使用参数，包括车速、前轮转角和路面摩擦系数，对不同模型的仿真结果进行比较分析，说明了轮胎的侧偏角和侧偏力之间存在的非线性关系对仿真结果的影响。

She was still standing back there in the corner, sobbing, with her face to the wall.

她还站在教室后面的拐角处, 脸冲着墙, 在抽泣.

Eight ball, corner pocket.

八号球进底袋.

Intersection spacing has three main categories , including signed intersection spacing, unsigned access spacing and corner spacing.

平面交叉口间距主要包括信号交叉口的间距 、 无信号接入间距以及支路与交叉口的间距.

We were tucked away in a secluded corner of the room

我们被藏匿到房间里一个隐蔽的角落。

The lamp, as at midday sun midsummer, do not have without block lam illuminated every corner.

家里的灯, 也如盛夏中午的阳光, 无遮无榄的照亮每个角落.

As I said, it's one corner with two kerbs.

正如我说过的，这是一个带两个路肩的弯道。

Sobel operator and gray square centrobaric arithmetic were synthesized with the improved SUSAN operator in subpixel corner detection.

在利用改进的SUSAN算子进行亚像素角点检测时，综合应用了索贝尔边缘算子、灰度平方重心法等方法。

Then, the numerical results are analyzed and the evolution laws of passage vortex, concentrated shed vortex and corner vortex are obtained.

进而，对数值模拟结果进行了分析，得出通道涡、集中脱落涡和壁角涡的演变规律。

The influence of the angle of convex corner on the effect of detonation waves

拐角角度对爆轰波拐角效应的影响

Analysis of transonic flow past an axisymmetric convex corner

轴对称跨声速绕流的凸角流动分析

On the Convex Corner Etching of Silicon Mesa Structure

硅台面结构凸角腐蚀原因探析

Convex Corner Undercutting and Compensation in Si ( 100) Wafer

硅（100）晶面的凸角腐蚀及其补偿

Compensation technique for < 100> convex corner undercutting in KOH anisotropic etching of silicon and its application

硅KOH腐蚀<100>晶向凸角补偿技术及应用

This paper presents a novel compensation technology for the ( 100) silicon convex corner under-cutting with 100 direction masks.

本文首次研究了（100）硅的、边沿＜100＞方向掩膜的各向异性腐蚀凸角削角补偿技术，成功地解决了上述问题。

Any policymaker with an interventionist bent would be banished to the corner, wearing a pointy hat.

任何有干预主义倾向的政策制定者都将被带上尖顶帽赶到角落里.

A new technique by computer has been used to trace fatigue growth of surface crack of out corner of cylindrical pressure vessel nozzles by using the methods of 1/ 4 displacement and finite element.

运用1/4点位移法和有限元技术对圆筒型容器接管外拐角表面裂纹扩展时应力强度因子的变化作了计算机数值跟踪。

This paper describes the distribution of surface hardened layer and analyses of the residual stress in the nodular graphite cast iron crank shaft with its Journal and arm corner hardened simultaneously by high frequency induction heating.

本文叙述了对球墨铸铁曲轴轴颈与园角部位同时高频淬火后获得的硬化层分布，以及硬化层中残余应力分析。