corrosion的例句大全

Contact corrosion of carbon-copper couple in 3% NaCl aqueous solution had been studied.

研究了3%NaCl溶液中碳-铜短路体系的接触腐蚀行为。

The contact corrosion of anodized titanium alloys

阳极化钛合金的接触腐蚀

The contact corrosion occurred between Ti or Ti-Alloy Parts and other metals in the aircraft structures is described in this paper.

本文叙述了飞机结构中钛及钛合金件与其它金属件之间所发生的接触腐蚀。

The scanning photos show that magnesium alloys for corrosive pitting corrosion types in 3.5% NaCl solution.

由扫描照片的结果可知，镁合金在3.5%NaCl溶液中的腐蚀类型为点蚀。

Hot dip zinc/ aluminum-plating is one of the most economic and effective protecting technologies in steels' corrosion protection in natural environment currently. However, molten zinc/ aluminum has strong corrosive nature on related equipments.

热浸镀锌／铝技术是目前防止钢铁材料在自然环境中腐蚀的最经济有效的防护技术之一，但熔融锌／铝液对热镀设备具有强烈的腐蚀作用。

Function of Garlic Juice as Corrosion Inhibitor in Oilfield Corrosive Medium

大蒜汁在油田腐蚀介质中的缓蚀作用

Stress corrosion fractures often occurred in piping with defects in corrosive medium.

在严重的腐蚀介质中，压力管道等含缺陷构件常常易于发生应力腐蚀脆性断裂。

However, due to the precipitation of chromium nitrides in the nitrided case, conventional plasma nitriding usually deteriorate in corrosion resistance, which is unacceptable in many application situations involving severe corrosive attack by the environment.

然而由于氮化铬在氮化层中沉淀析出，在许多受环境严重腐蚀的应用场合，使传统的离子氮化耐腐蚀性能恶化，这是无法接受的。

The corrosion essence of the concrete is that corrosive materials attack its hardened cement paste and thus destroy the concrete as a whole.

混凝土的侵蚀实质是水泥石的侵蚀，而造成混凝土宏观破坏。

Study on corrosion features of fused zirconia corundum block of glass tank furnace

玻璃池窑电熔锆刚玉砖侵蚀特征的研究

Based on such a pipeline corrosion model, an elastic foundation beam model is employed to express the seismic displacement and stress of pipeline as orthogonal cosine series.

在此基础上，根据弹性地基梁模型，将管线周围土体位移正交展开为余弦级数的形式，获得了地震作用下腐蚀管线位移反应和应力反应的解析表达式。

For the chrome refractory, the corrosion rate in three iron phosphate melts containing simulated HLW waste was under 0 1mm/ day at the melt line.

对氧化铬耐火材料来说，其在三种含有模拟HLW废料的铁磷熔体中的熔线腐蚀速度小于01mm day。

The application of thermo-spraying to anti-corrosion of oil tanks has some distinguished advantages such as good anti-corrosive effect, long period of service and low cost of upkeep.

热喷涂技术应用于油罐防腐具有防腐效果好、使用寿命长、维修费用低等特点。

The laboratory assessment tests showed that, at a concentration of 60 mg/ 1, the corrosion rate of test coupon was 0.029 mm/ yr and the cohesion rate was 4.32 mcm, which were at the best levels.

实验室评定表明：在药剂浓度为60mg/L的情况下，碳钢试样的腐蚀率为0.029mm，a，粘附速度为4.32mcm，均达到很好级；

Corrosion Fatigue Cracking of In-service 4340 Steel Super High Pressure Pipe

在役4340钢超高压管的腐蚀疲劳开裂

With increasing corrosion time the impact toughness of high Mn steel obviously decreased. The major mechanism was effect of the caustic embrittlement cracking.

随着热强碱腐蚀时间的延长，高锰钢的冲击韧度明显降低，碱脆开裂是造成高锰钢冲击韧度下降的主要原因。

With an increase of the chromium content in the cast steel, active dissolving corrosion increased, however, tendency of caustic embrittlement cracking decreased.

随着钢中含铬量的增加，试验材料的活性溶解腐蚀失重增大，但碱脆开裂的倾向减少。

Effect of cold work on the caustic stress corrosion cracking of alloy 800

冷加工对800合金抗碱性应力腐蚀破裂的影响

Influence of Some Processing Factors on Susceptibility to Caustic Stress Corrosion Cracking of Modified Alloy 800

某些加工因素对改性800合金碱性应力腐蚀破裂敏感性的影响

An Investigation on Interface Reaction Regularity for Caustic Stress Corrosion Cracking of Fe-Cr-Ni Alloy

Fe-Cr-Ni合金碱性应力腐蚀破裂界面反应规律的研究