Second, why should reclamation be the way to realize his Christian ideal in the novel The Old Curiosity Shop;

Interpreting the Theme of Reclamation in the Old Curiosity Shop

解读《老古玩店》中的回归主题

In this paper application of "static placing in heated room" has been proposed as a means for decreasing the autoclave curing time of aerated pfa concrete.

本文提出了采用热室静停作为缩短粉煤灰加气混凝土蒸压养护时间的手段。

Hydrothermal reaction of Steel-slag in autoclave curing

钢渣在高温高压下的水热反应

Study on tye Decrease of Autoclave Curing Time for Aerated Pfa Concrete

缩短粉煤灰加气混凝土蒸压养护时间的研究

Recycled brick is a kind of autoclaved brick which is made of building rubbish as aggregate, fly-ash and industrial waste residue, by autoclave curing technology.

再生蒸压砖是以建筑垃圾为骨料，并利用粉煤灰和工业废渣，采用高压蒸汽养护工艺制成的新型墙体产品。

The Research and Application of Concrete Curing Agent of Emulsion Wax

乳化蜡型混凝土养护剂的研制与应用

Research on economy of concrete curing by high performance curing agent

高性能养护剂的技术经济性能研究

Research on water glass concrete curing compound

水玻璃系混凝土养护剂的研究

Application of concrete curing agent cement concrete pavement of high grade highway

混凝土养护剂在水泥混凝土高级路面中的应用

Role of moist therapy in curing dermal radio lesions

湿性疗法在治疗皮肤放射性损伤中的作用

No matter what it is, NSC or HSC, at the 6th day. All mechanical parameters can reach around 90% of 27 day' moist curing.

无论是NSC还是HSC，标准养护6天的力学参数都能达到标准养护27天的90%左右。

The test results show that the longer the time of moist curing, the higher the values of compressive strength, splitting tensile strength, elastic modulus and critical stress intensity factor.

试验结果表明，抗压强度、弹性模量、抗拉强度以及临界应力强度因子随标准养护时间的增长而增大，弹性模量对养护条件的敏感性最大。

At steam curing and moist curing conditions, the mechanical properties of concrete with different fineness and different proportions of ultrafine fly ash slag composite were studied.

研究了在蒸汽养护和标准养护条件下掺粉煤灰-矿渣复合超细粉混凝土的力学性能。

The numerical simulation method can be used to optimize the curing temperature cycle, which can improve the quality of composite products.

模拟程序可以计算得到任意时刻复合材料内温度及固化度分布，通过数值模拟可以有效地优化固化加热工艺参数，提高产品质量。

The improvement of peroxide crosslinked EPDM properties with trimethylolpropane triacrylate ( TMPTA) was studied. It was found that the crosslinking rate and crosslinking density increased and the curing cycle time reduced with the addition of TMPTA in the peroxide crosslinking system for EPDM/ silica compound;

在EPDM／白炭黑胶料的过氧化物硫化体系中，加入三羟甲基丙烷三丙烯酸酯（TMPTA）能够迅速提高硫化胶的交联效率，增大网络密度，缩短硫化时间；

The test results showed that at a tailings/ cement ratio of 6 ∶ 1 and paste backfill density of 80% and 28 day curing cycle, the compressive strength reached 3.79 MPa;

试验结果表明，在尾砂水泥比为6∶1，浓度80%时，28d抗压强度达到3.79MPa；

The curing cycle shortened significantly as the level of Calcene CC in SBR or BR compounds increased.

在SBR和BR胶料中随白燕华CC用量的增大，硫化时间明显缩短。

The curing cycle of polymeric composites has significant effect on its performance and economic indices.

聚合物基复合材料的固化制度是影响其性能经济指标的重要因素。

Study on the Appearance and Chemical Variation Relationship of Burley Tobacco Leaves in Air curing Process

白肋烟晾制过程中烟叶外观变化与内在变化关系的研究

Studies on change of main chemical components of burley tobacco during air curing process

不同晾制阶段白肋烟主要化学成分的变化