Microwave assisted extraction ( MAE) of eel bone oil was studied.

Preparation and Application of Bone Oil Fatliquor

骨油皮革加脂剂的制备与应用

Gavan McCarthy and James Bradley, University of Melbourne ( Australia): The Bond servant of two masters? Big history and balancing the needs of archivists and analysts.

墨尔本大学加文·麦卡锡、詹姆士·布拉德利，《两位主人的奴隶？&大历史与档案工作者和研究者需求之平衡》。

Bond servant: a person obligated to service without wages.

奴隶：被强迫提供服务而得不到报酬的人。

The first step is to model the close loop control system of wire bonding force.

两步走的策略被采用：第一步，建立键合力控制系统的闭环模型；

The result showed that sand ejection treatment could get proper bonding force.

结果显示，在一般情况下喷砂处理即可达到较高的粘结强度。

Many factors have important effects on the controlling performance of bonding force system.

所以，引线键合的质量和可靠性很大程度上取决于键合力控制的性能。很多因素都对键合力控性能有很大的影响。

The Optimization Design of Wire Bonding Force Control System

引线键合力控制系统的优化设计

The Mechanism Formed the Bonding Force between New and Old Concrete

新老混凝土界面粘结力形成机理

And the content of chromate and polyvinyl alcohol also affect the bonding force between the coating and matrix.

涂液中铬酐和聚乙烯醇的含量还影响涂层与基体之间的结合力，必须适当控制。

Because it does not exist strong bonding force between alumina nitrate and calcium carbonate, the preparation of alumina tube with alumina nitrate using nano-calcium carbonate as template is not feasible in experimental conditions.

实验结果表明：由于纳米碳酸钙和硝酸铝之间不存在较强的结合力，所以在本文的工艺和实验条件下，以纳米碳酸钙为模板制备氧化铝空心管的方法是不可行的。

A high strength insulating brick with high alumina and low iron oxide has been developed by using floating particles and bonding clay as starting material with expanding agents, flux and combustible additives.

以漂珠、结合粘土为原料，加入膨胀剂、助熔剂和可燃加入物.可制得高强、高铝、低铁隔热耐火砖。

All these fulfil the quality requirement of electroceramics and the rectorite clay is a new-type bonding clay of electroceramics.

研究结果表明累托石粘土是一种新型的优质电瓷结合粘土。

Analyse the application of visual system in COG bonding machine.

针对视觉系统在全自动COG热压焊机中的应用进行分析。

The automatic position alignment system for the ultrasonic wire bonding machine

超声压焊机自动位置对准系统

Design of control system for the tape automatic bonding machine Based on PLC

基于PLC的TAB绑定机控制系统设计

Design of welding pressure control system for ultrasonic gold wire bonding machine

超声波金丝球焊线机焊接压力控制系统设计

Development of Control System Used in Ultrasonic Al Wire Bonding Machine

超声波铝线自动邦定机控制系统的研制

In order to enhance the welding speed of microcircuit chips, the control software algorithm for the bonding machine was optimized.

为了提高生产微电路芯片的焊接速度，我们对超声波焊接机工业控制软件的算法进行部分优化。

The control software for ultrasonic bonding machine is indispensable for the automatic production-lines run by manufactories making microcircuit chips.

超声波焊接机控制软件是国内外生产微电路芯片厂家自动化流水线的不可缺少的一部分。

Research on Bonding Layer of Transfer Foil Operation

转印箔中粘接层的研究